mpgo Wall Mounting Made Easy

With the use of Command™ hanging strips, mounting mpgo wall art could not be easier and more convenient. To ensure that you mount your wall work correctly, we advise that you follow the below steps. Failure to follow these steps may result in damage. 

1. Wipe wall with damp cloth or rubbing alcohol (if available). Ensure wall is completely dry before mounting.

2. Separate strips. Click strips together.

3. Remove one side of liners. Stick on print as indicated in the dotted lines. Press firmly.

4. Remove remaining liners. Press print firmly to wall.

5. To ensure adhesive holds, temporarily remove frame from wall to reinforce strips. Peel print as shown. Press each strip on wall for 30 sec.

6. Wait 1 hour for adhesive to build. Align strips. Press frame until each pair of strips clicks.

Replace or remove with ease

If you need to remove or replace your print, simply grab the bottom corners, and peel the print from wall. Do not pull straight off, and never pull directly away from wall. Once the print is removed, pull, and stretch the strip slowly against the wall at least 15 inches (38 cm) to release.

To which surfaces will Command™ strips stick?

Painted, stained, or varnished wood, glass, tile, metal, painted drywall and other smooth surfaces. Although it is also possible to mount to wallpaper walls, we cannot guarantee the results.